Moon GPS OBD

Package Contents

- MOON OBD GPS device
- User Manual
(SIM - Already pre-installed inside the device: do not attempt to open it and do not remove the protective film surrounding it, you may invalidate the warranty).

--------------------------------------------------------- 

 

SECTION 1
INSTALLING THE GPS IN THE VEHICLE

 

GPS Device Installation

Follow these steps to install your MOON OBD GPS in your vehicle:

Step 1: Locating the OBD-II Connector
In the case of a passenger car, the OBD-II port is usually located on the driver's side under the dashboard, near the steering wheel; sometimes near the centre console, sometimes in the glove compartment on the passenger side, or underneath it. This type of connector is standard on all vehicles manufactured since 1996.

In the case of motorbikes, the OBD connector is generally less common, but in newer models, especially those complying with Euro 4 and later standards, it may be present. The OBD connector is usually located in one of these places: under the seat near the battery or the ECU, near the dashboard or under the fuel tank, or on the side area.
NOTE: You may need an adapter (not included) for your specific model of motorbike.

In both cases, we suggest doing an online search specific to your car/motorcycle model or consulting your vehicle manual.

 

Step 2: Connecting the Device
Connect the MOON OBD GPS to the vehicle by gently inserting the device into the OBD-II connector until it locks into place.
Make sure it is inserted correctly and firmly to ensure optimal operation.

Step 3: Checking Operation
Start the vehicle engine:

After connecting the device, turn on the engine to start the GPS device.
Check the LED on the device to make sure it is lit. A lit LED indicates that the device is properly powered.

 

Step 4: Online Registration and Configuration
You can now proceed to register and configure your GPS device

--------------------------------------------------------- 

 SECTION 2
REGISTRATION AND DEVICE MANAGING

 

CREATION OF A NEW ACCOUNT

01 – First Access
Access the site via the QR code or the following link:

http://link.cycl.bike/gps

 
02 - Account Registration
Since this is your first login we will need to create your account:

Check the   Not a member yet?   box (fig. 1) and once in the new page enter your preferred e-mail address (fig.2). 
Select   Register   to continue and, in a few moments, you will receive login credentials on your email (fig.3) that you can use to log in from any device.

03 - Login
Log in to the portal where you just registered with your credentials that were sent to you.

 

04 - Device Registration
You will arrive at the screen shown in Fig. 4:
click on the “+” button to add your device.

In the new window (Fig. 5) select the Main menu.

- Then fill in the Name: field by giving the name you prefer for your device (e.g., 'Scooter Luca').

- In the Device IMEI/Tracker ID field, on the other hand, report the device code found on the device:

FMB020: under the right QR code (IMEI).
ST-902A: below the barcode (ID).

05 - MONITORING
After installing the device and connecting it to the power supply, in about 60 seconds (the start-up time) you will be able to manage and monitor your vehicle with absolute ease! (Fig. 6)

06 - SUBSCRIPTION, RENEWAL AND CANCELLATION
The device includes a 12-month free trial. Upon registration on the portal, the “GPS start 12 months free” plan will be automatically activated.

After 12 months, to renew your subscription, go to the ‘Membership’ section in the drop-down menu of ‘My Account’ (fig. 7), where you can view the currently active plan (fig. 8). By clicking on ‘Renew/Upgrade’ you will be redirected to the screen shown in fig. 9: 

• The first plan, “Cancel Subscription/Free Plan”, is dedicated to subscription cancellation, giving customers the option to cancel their plan at any time.

• All other plans such as the “GPS Monthly Subscription” are paid subscriptions to be activated after the free 12 months.
By clicking on the   Upgrade   button, you will be able to purchase the plan and access the payment screen. Upon payment, the automatic monthly renewal mode will also be activated, ensuring easy and seamless renewal.

 

Common Troubleshooting

• LED does not light up: Check that the device is correctly connected to the OBD-II connector and that the vehicle is switched on.
• GPS does not show position: Make sure the vehicle is outdoors, away from tall buildings or other possible interference that could block the GPS signal.
• Registration problems: Check that you have entered the IMEI number correctly and followed all instructions step-by-step on this guide.

 

Help and Support

If you experience any further problems with the installation or use of your GPS device, please contact MOON customer support via their email address support@cycl.bike

 

Thank you for choosing our product!

By following these instructions, your device will be correctly installed and ready for use in a few minutes.

Have a safe journey and drive safely!