Light up your ride with WingLights POP, our best-selling sensation! Grab your 30% off discount with the code WinterPOP30

WingLights v3 Fixed Installation & Use

WingLights_Fixed_360_Front_View

COMPATIBILITY (BIKES AND E-BIKES):

WingLights v3 Fixed are compatible with straight handlebars (flat bars) and handlebars with curvature up to 30°. They were not designed to be compatible with drop bars, bullhorn handlebars and cruiser bars.
WingLights_Fixed_360_Compatibility

COMPATIBILITY (ELECTRIC SCOOTERS):

WingLights v3 Fixed are fully compatible with any e-scooter with hollow handlebars. For crescent-shaped handlebars  you will need to use an adaptor ( you can check our shop for the WingLights Aluminium Adaptors or WingLights Plastic Adaptors ).
Handlebar Profile Compatibility

IMPORTANT NOTES:

To install WingLights v3 Fixed you will have to cut part of your handlebar grips.  This is not required if you have grips with open ends or removable caps at the extremity.  
If you do not want to modify your original grips we suggest to buy another set of handlebar grips with open ends.
In the case of electric scooters that require a WingLights Adaptor we suggest to buy a grip with a length of 135 or 145mm.

TOOLS REQUIRED:

Tool-Cutter

FIRST ACTIVATION:

1) Unscrew the light module from the indicator base.
2) Remove the insulation pad.
3) Screw the light module and the base back together.

WingLights_v3_Fixed_Insulation_Pad

BATTERY REPLACEMENT:

1) Unscrew the light module from the indicator base.
2) Remove the used batteries from the plastic case and dispose of them properly by recycling.
Insert the new batteries in the plastic case.
3) Screw the light module and the base back together.

WingLights_v3_Fixed_Battery_Replacement

HOW TO USE:

Tap once to activate or deactivate the turn signals.
(an auto turn-off function has been set to 45 seconds to preserve the battery)

WingLights_v3_Fixed_button

INSTALLATION:

ARE YOU USING WINGLIGHTS ADAPTORS ON AN ELECTRIC SCOOTER? IF YES, PLEASE REFER TO THIS GUIDE FOR THE ADAPTORS INSTALLATION FIRST.

Preparing to install:

If your handlebar grips have closed ends:
1) Remove the original grips from the handlebar.
2) Using a cutter, while being extremely careful not to get hurt, create a ~15mm of diameter hole into the end of the grips.
3) Insert the grips back into position.

If your handlebar grips have open ends:
Remove the caps/plugs if there are any.


Installing the WingLights v3 Fixed:

Slightly tighten the nut at the end of the WingLights in order to compress the rubber ring then insert WingLights into the handlebar hollows (or into the Adaptor).

If the fit is too loose, remove the light and tighten the nut more. Otherwise, if there is enough friction, tighten the head 3 full rotations to ensure a secure fit.

Depending on the size of your handle cavity replace the rubber ring with the larger size provided.  Do this unscrewing the nut and replacing the rubber ring.


Adjusting the orientation:

Turn on the WingLight by tapping on the button.
Rotate the light together with its mounter until the LEDs are facing the front and the rear of the vehicle.

 

Installation Video:

 

Having problems? Contact Us

Send us an email at support@cycl.bike and we will be happy to provide further assistance.

Back to Installation page   Back to installation page

Schließen (Esc)

Sign up for our newsletter!

We send out occasional newsletters with our latest news, new product launches and exclusive offers. 

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Suchen

Einkaufswagen

Ihr Einkaufswagen ist im Moment leer.
Einkauf beginnen