WingLights DropLights Installation & Use
COMPATIBILITY (BIKES AND E-BIKES):
WingLights DropLights are exclusively compatible with Drop Bar handlebars. They are NOT compatible with straight handlebars (flat bars), bullhorn handlebars and cruiser bars.
COMPATIBILITY (ELECTRIC SCOOTERS):
WingLights DropLights are not compatible with e-Scooters.
TOOLS (PROBABLY) REQUIRED:
FIRST ACTIVATION / BATTERY REPLACEMENT :
1) Unscrew and remove the nuts and the rubber ring from the adapter.
2) Pull the dome away from the plastic base and remove the internal housing structure from the dome. Lift the PCB to expose the battery case.
3) Remove the old battery pack and replace. Dispose of the old batteries properly by recycling.
4) Reassemble the product.
HOW TO USE:
Tap once to activate the red position light.Tap another time to activate the red flashing light.
Tap again to turn off.
INSTALLATION:
Remove the original bar end plugs at the extremities of your handlebar.
Slightly tighten the nut at the end of the WingLights in order to compress the rubber ring then insert WingLights into the handlebar hollows (or into the Adaptor).
If the fit is too loose, remove the light and tighten the nut more. Otherwise, if there is enough friction, tighten the head 3 full rotations to ensure a secure fit.
Depending on the size of your handle cavity replace the rubber ring with the larger size provided. Do this unscrewing the final nut and replacing the rubber ring.
Installation Video:
Send us an email at support@cycl.bike and we will be happy to provide further assistance.
Back to installation page